How noise suppressors Eases Your Shooting Experience

Who knows, 308 muzzle brakes may become an essential part of your rifle shooting future. Did you know that they have been around ever since World War II? While their use has always been limited to custom guns, it is changing rapidly as custom gunmakers are busy installing these in record numbers. Besides, they are the trendsetters in rifle customization.

When asked about the increase in 223 muzzle brake installations, an anonymous person simply stated that modern age men are afraid to shoot without one. Mr. Jarrett currently installs these on approximately 85 percent of the rifles in his possession.

As much as 92 percent of Mark Bansner’s rifles are fitted with a silencer. Mr. Brown has these mounted on all his guns bar his most dangerous game rifles (The reason for this will be touched on later).

How Not to Get Kicked Backward When Firing a Shot

Hunting rifles just like any other kicks back due to the gas that propels the bullet one way while the gun moves in the opposite direction with a powerful force. By changing the direction of the gas column, you won’t get kicked so hard.

The way to pull this off is through cutting holes or ports in the barrel of your gun to divert the gas sideways or upwards. Should the gas move upward, it will press down on the muzzle and counteract muzzle jump. An example of this is the Magnaport system, which happens to be a pair of trapezoidal slots cut out of the barrel to run parallel to the bore. The Remington VTR brake is another example of a series of slots that have been cut horizontal to the bore.

However, several brakes take the form of 2-inch tubes that you would screw onto the muzzle to divert gas 90 degrees to the side of the barrel, which is accomplished by drilling a series of small parallel holes in the tube itself. Most recoil reducing recoil reducers can be disconnected while the threads towards the end of the barrel can be covered over with the help of a tiny screw-on cap. Madhouse Design seems to have the best silencers for accuracy on hand.

The advantage to Using recoil suppressors

According to a couple of recoil suppressors reviews, brakes cut recoil by as much as 50 percent. Plenty of rifles would be unshootable if they were not fitted with brakes.

Varmint shooters, who make use of heavy rifles that do not kick as much also favor noise reducers for hunting rifles as it allows them to see the bullet splash, which is not possible if you have to deal with recoil.

Overall when fitted to lighter barrels, brakes bring about better results regarding accuracy.

Disadvantages to Using Brakes

One of the first things mentioned is cost. Take a good flash hider, add the installation cost, then you are probably looking at the price of about $250.

Secondly, the muzzle blast that comes back at you rather than away from you is very noisy. Some would say it is unbearable. Whether you are hunting or practicing at a shooting range, undoubtedly, you’ll need to wear hearing protection.

If you are out hunting and are accompanied by a couple of trackers, then it is crucial that they hear what’s going on around them. If you cut loose with a muzzle-braked gun, they will not detect hoofbeats, screams, roars, growling, or any other sounds.

Thirdly, the length can also be seen as an issue with brakes as it typically adds an additional 2-inches to a barrel. Some people are not bothered about this too much.

Another problem that rears its head with brakes is that it tends to break scopes. Riflescopes can easily withstand the powerful rearward acceleration and gradual deceleration of gas. However, when gas meets the compensator, deceleration become violent, resulting in broken scopes. It will, however, depend on the quality of the range you are using.

It is suggested that devout riflemen and hunting experts invest in the popular triple-port flash suppressor designed by Madhouse Design. Sensitive shooters no longer have to deal with concussions, scope cuts and bulged spinal discs as a result.